Myfab

 Realize your nano vision

Myfab and NorFab User Meeting 2013

Ångström Laboratory, Uppsala 17-18 April

Welcome to attend and contribute to the Myfab and NorFab User Meeting 2013 at the Ångström Laboratory, Uppsala University,17 – 18 April! This is the third Myfab user meeting and the first joint meeting with Norwegian NorFab. We look forward to two days of interesting presentations, visit to the Ångström Microstructure Laboratory, technical workshops and presentations of your work at the poster session.

Participation is free of charge for Myfab users. This includes all meals (lunch and dinner) as well as our travel and accomodation arrangements for non-local participants (from Gothenburg and Kista). Accommodation cannot be guaranteed for registrations later than February 28 (preliminary). A registered user failing to attend, without due cause, will be charged the full cost (this includes lunches, dinner, accommodation and travel expenses).

Registration is now closed.

TRAVEL ARRANGEMENT
Travel arrangement Gothenburg-Uppsala:
17 April Train 05:55 Gothenburg C (09:49 arrive at Uppsala C), followed by bus to Ångström Laboratory.
18 April: Bus from Ångström Laboratory, 16:11 Uppsala C (20:25 arrive at Gothenburg C)
Your ticket can be collected from Christina Caesar.

Travel arrangement KTH-Electrum to Ångström Laboratory:
For participants from KTH-Electrum, a joint travel arrangement by bus will be organized. Participants from KTH-Electrum are encouraged to book accommodation in Uppsala and join the dinner. 

QUESTIONS/CONTACT
Questions about the user meeting should be directed to the Myfab Communications Manager

PhD Christina Caesar
christina.caesar@chalmers.se
+46 (0)703 08 88 22


We look forward to meeting you!

Thomas Swahn, Director Myfab and Kay Gastinger, Director NorFab 

www.myfab.se | www.norfab.no
 

Update: Practical information

 

Finding your way and transportation
The User meeting will be held at Ångström Laboratory, Adress: Lägerhyddsv. 1, http://www.polacksbacken.uu.se/Find_us/

Taxi/bus
Uppsala Taxi: www.uppsalataxi.se, 018-100 000  
Taxi Kurir, Uppsala: www.taxikurir.se/uppsala, 018-12 34 56
Bus in Uppsala, www.ul.se
From Cityterminalen/Centralstation in Stockholm you can go bu bus or train to Uppsala, www.resplus.se

 

Myfab arranged transportation

Bus transport  to and from Ångström to hotels:

17/4 at 18:30 departs from Ångström Laboratory to Radisson Blu Hotel, Scandic Uplandia and Best Western Hotel.

18/4 at 08:30 departs from Radisson Blu Hotel, Scandic Uplandia and Best Western Hotel Svava to Ångström Laboratory.

 

Participants traveling from Gothenburg

Please collect your train tickets from Christina Caesar, room D321 MC2, before Friday 12/4 at 12:00.

17 April Train 05:55 Gothenburg C (09:49 arrive at Uppsala C), followed by bus to Ångström Laboratory. The bus will depart from the entrance of Radisson Blue at Uppsala C.

18 April: Bus from Ångström Laboratory, 16:11 Uppsala C (20:25 arrive at Gothenburg C)

 

Participants from Stockholm/Kista

17/4 bus departs at 08:30 from AlbaNova, Roslagsvägen 30B (Godsmottagningen), 09:00 Electrum: Isafjordsgatan 20-24

18/4 bus departs at 15:20 from Ångström to Electrum /AlbaNova

 

Hotel reservation

Rooms have been reserved at three different hotels: Radison Blu Hotel, Scandic Uplandia and Best Western Hotel Svava.

 

Radisson Blu Hotel

Stationsgatan 4,753 40 Uppsala

+46 18 47 47 900

www.radissonblu.com/hotel-uppsala

 

Scandic Uplandia

Dragarbrunnsgatan 32, 753 20 Uppsala

+46 18 495 26 13

www.scandichotels.se/Uplandia

 

Best Western Hotel Svava

Bangårdsgatan 24,753 20 Uppsala

+46 18 130030

www.hotelsvava.se

 

The Conference Dinner
17/4 at 19:30, Norrlands Nation, Västra Ågatan 14, Uppsala.

 

QUESTIONS/CONTACT

Questions about the user meeting should be directed to the Myfab Communications Manager

PhD Christina Caesar

christina.caesar@chalmers.se

+46 (0)703 08 88 22

 

 

 

Program Myfab and Norfab User Meeting 2013

Last Updated 4/12/2013 10:10:49 AM
By: Peter Modh

Wednesday April 17

10:00

Registration and coffe, sign up for lab tours, mounting of posters
10:30 Thomas Swahn and Kay Gastinger, presentation of Myfab and Norfab, Siegbahnsalen
10:40  Aaron Stein, Center for Functional Nanomaterials at Brookhaven National Laboratory,
”Electron Beam Lithography for Synchrotron Applications”, Siegbahnsalen
11:20 Rainer Adelung, Christian-Albrechts-University Kiel, Germany,
"Multifunctional ZnO nanostructures: from viruses to microchips", Siegbahnsalen
12:00 - 13:15 Lunch
13:15 - 16:35

Thematic seminars

The thematic seminars consist of 40-minutes presentations + time for questions and discussion. 
The presentations aim to educate in techniques and tools with a practical approach.
The themes of the thematic seminars are:
Materials Analysis and Characterization
Electron, ion beam and probing technologies will be reviewed in tutorial presentations. Most of this is available within our infrastructures and instructive examples will be given. Some outlook into new technologies and possibilities will also be presented.		 Thin film technologies
The choice of method for deposition of thin films will eventually determine the properties of the final device. Some key methods for thin film deposition, available within our infrastructures, will be described in detail. Both technology and device examples will be given.
Etching Technologies
An historic overview, with present status and development trends will be followed by seminars devoted to specific technologies or materials. The presentations should give some knowledge about strong areas at the various sites within our infrastructures.		 Lithography
Tutorial presentations about electron beam lithography, stepper and contact lithography, imprint and resist technology. The presentations should also include an overview of the available technologies at the various infrastructures.
Analysis Thin Film technologies Lithography Etching technology  
13:15  “FIB/SEM methods for analysis and characterization”, Fredrik Ericson (UU), Ken Roger Erwik (NTNU) “Si-Ge-Sn materials for electronic and photonic applications”, Henry Radamson (KTH) “High Resolution Electron Beam Lithography”, Piotr Jedrasik (Chalmers) “Introduction & Overview”, Hans-Olof Blom (UU)
14:15  “TEM - why, how and where?”, Klaus Leifer (UU), Randi Holmestad (NTNU) "Chemical vapor deposition of large area graphene: the technique towards real applications", Jie Sun (Chalmers) ”Stepper lithography”, Per-Erik Hellström (KTH) “Ion Beam Etching”, Mats Hagberg (Chalmers)
15:15  Coffee
15:35  "Characterization of surface properties by electron and mass spectroscopy (XPS, Auger and SIMS)”, John Walmsley (NICE, SINTEF Materials and Chemistry) and Alexei Zakharov (MAX Lab) "Band-gap engineering in MOVPE-ZnO", Vishnukanthan Venkatachalapathy (UiO) “Nanoimprint as next-generation lithography in nanofabrication”,Ivan Maximov (Lund U) “Deep Silicon Etching at MyFab - a Comparative Study”,Gabriel Roupillard (KTH)
16:35 - 18:30 Poster Session and lab tours.
Lab tours start at the registration desk every 10 minutes starting at 16:40, last tour starts 18:00. Duration 30 minutes.
19:30 Dinner at Norrlands Nation, Västra Ågatan 14, Uppsala

Thursday April 18

09:00 - 11:00

Thematic seminars

The thematic seminars consist of 40-minutes presentations + time for questions and discussion. 
The presentations aim to educate in techniques and tools with a practical approach.
Analysis Thin Film technologies Lithography Etching technology  
09:00  “Electrical and optical characterisation of Nanowires”, Lyobomir Ahtapodov (NTNU) & David Lindgren (LU) “ALD / CVD: Chemical Routes to Ultra Thin Films”, Mats Boman (UU) “Helium Ion Microscopy - Extending the frontiers of nanotechnology”, Peter Gnauck (Zeiss) “Metal & Metal Oxide Etching”, Colin Welch (Oxford PT)
10:00-10:15 Coffee
10:15  “Scanning Probe techniques (AFM, STM)” Daniel Forchheimer (KTH), Klaus Magnus Johansen (UiO) “Growth and in situ doping of III-V nanowires”, Jesper Wallentin (Lund U) "Material innovations for today and the future", Arne Schleunitz and Anja Voigt, Micro resist Technology GmbH “Compound Semiconductor Etching”, David Lishan (Plasma-Therm)
11:15 - 12:15 Lunch and poster session
12:15 - 13:35 Academic and entrepreneurial exploitation – two inspiring presentations
This session consists of two 40-minutes presentations + time for questions and discussion.
The presentations aim to inspire Myfab users primarily in their early stages of their carreers,
to be eye openers, and to invite to active participation with questions.
Both speakers have a long track-record of success from their fields, and will present examples
and real-life proven advice which might take you further in your career.
12:15 Bo Hammarlund, “Cutting Edge Technology Startup process”, Siegbahnsalen
Bo Hammarlund , civ .ing ( KTH ’82) Optoelectronic materials R&D , Inter’l B2B Sales and Marketing,
Entrepreneur since 2005 ( co-founder in TranSiC (sold 2010 to Fairchild Semiconductors), SenSiC,
Scint-X, SensAbues , Ascatron, Nocilis Materials, Epiclarus, SenseM, Polly Power, EN3AD )
12:55 Joseph Gorman, Senior scientist in SINTEF ICT, ”Successful launch of European projects “, Siegbahnsalen
13:35  Andreas Vogl, SINTEF ICT, “PiezoMEMS with thin-film PZT - A key enabling technology”, Siegbahnsalen
14:15 - 14:30 Coffee
14:30 Christoph Quitmann, Director Max IV Lab, Siegbahnsalen
15:10 - 15:15 Concluding remarks